Feed truck with pneumatic unloading ZSK-24 on MAZ-6312С5 6x4 chassis
Feed trucks with pneumatic unloading move feed using air pressure created by a compressor. The feed truck with pneumatic unloading can also be used as a carrier for dry cargo: flour truck, cement truck.
- The unloading speed of a feed truck with pneumatic unloading is 312 tons per hour (480 m³ per hour) or 5200 kg per minute, which is 20 times faster than the unloading speed of a screw-feed truck, which is 15 tons per hour or 250 kg per minute;
- The feed truck with pneumatic unloading, unlike screw-feed trucks, does not damage pellets for compound feeding during unloading;
- Feed trucks with pneumatic unloading have better sealing and no spillage of feed during operation, which reduces the likelihood of contact with wild birds and the risk of contamination.
- Compared to screw-feed trucks, feed trucks with pneumatic unloading have lower feed compaction and less feed sticking to the walls of the hopper, as well as a lower risk of moisture entering the hopper.
- Feed trucks with pneumatic unloading are structurally more reliable compared to screw unloading mechanisms (frequent chain breaks, sheared pins, and broken stars).
We supply feed trucks on KAMAZ, MAZ, and Chinese chassis throughout Russia and the CIS countries: Kazakhstan, Kyrgyzstan, Moldova, Azerbaijan, Armenia, Belarus, Tajikistan, Uzbekistan.
Technical specifications:
Transported product: Bulk goods
Tank capacity: 24m3
Number of sections: 3
Tank material: Carbon steel ST52
Tank shape: Cylindrical section, with three cones. The tank is divided into three sections by partitions
Loading equipment: Three necks with a diameter of 450 mm at the top of the tank. The covers are fixed in a closed position using four wing bolts
Unloading equipment: Unloading is done pneumatically. Three unloading cones at the bottom of the tank
Shut-off valve with pneumatic control for each section
Unloading pipelines DN100 steel
Unloading pipeline is routed backward, equipped with BRS type Storz DN100
Compressor BDW-8 driven by the chassis KOM, oil-free, output 480 m3/h
Unloading hoses: 2 unloading hoses of 4 m each, stored in plastic cases on the right side
Equipped with BRS type Storz DN100
Tank equipment:
- Storage compartment in the rear console
- Plastic water tank with soap dispenser
- Working area lighting Side protection made of aluminum alloy
- Ladder at the rear of the tank
- Liftable railings with pneumatic drive
- Grating profile ramp at the top, along the entire length of the tank
Tank painting
- Shot blasting of all steel parts PPG epoxy primer treatment Two-component glossy enamel PPG painting
Chassis specifications
Base chassis MAZ 6312С5 6x4
Engine YAMZ-53603.10
Gearbox 9JS135TA
Dimensions: 9990 x 2550 x 3940mm
Front suspension: Leaf spring
Rear suspension: Leaf spring
Gross weight: 33,500 kg
Curb weight: 14,225 kg
Payload capacity: 18,875 kg
Front axle load: 7,500 kg
Rear axle load: 25,600 kg
Ask a question about automotive equipment:
+7 (4922) 779-699
Yuri Fomin +7 (915) 766-66-46, fomin@kamaz33.ru
_____________________________________________
eed trucks ZSK (dry feed loaders) are designed for transporting dry compound feeds from manufacturers to livestock farms and loading bulk goods into stationary storage facilities. The dry feed loader (ZSK-15, ZSK-20, ZSK-24) combines a feed container (barrel) and a pneumatic unloading unit.
The unloading speed of the feed truck with pneumatic unloading is 312 tons per hour (480 m3 per hour) or 5200 kg/min, which is 20 times faster than the unloading speed of a screw feed truck, which is 15 tons per hour or 250 kg/min.
In addition to its main purpose, the feed truck with pneumatic unloading (dry feed loader with pneumatic unloading) can be used for bulk transportation of grain, flour, dry building mixtures, and cement.
All feed trucks (ZSK dry feed loaders) are fully guaranteed by the manufacturer, with spare parts, repair, and servicing available. You can buy a dry feed loader with delivery to any point in Russia.
For optimal selection of equipment, please review the catalog of the available models of compound feed trucks with equipment for loading dry feed. We will answer all your questions.
You can buy the feed truck with pneumatic unloading ZSK-24 on KAMAZ-65115 chassis (buy ZSK-24 with pneumatic unloading on KAMAZ-65115 chassis) on our website by submitting an application for the relevant model of equipment on your selected chassis.
We deliver feed trucks (ZSK) on KAMAZ, MAZ, JAC, DongFeng, Shacman chassis throughout Russia (Ufa, Perm, Kazan, Yekaterinburg, Chelyabinsk, Stavropol, Krasnodar, Rostov-on-Don, Nizhny Novgorod, Moscow, St. Petersburg, Omsk, Tomsk, Tyumen, Irkutsk). Competitive prices, in-stock availability, technical support during warranty and post-warranty periods, spare parts.
