Pellet transport vehicle with pneumatic unloading 13m³
The unloading speed of the pellet transport vehicle with pneumatic unloading is 785 m³/h or 8 tons/min.
We deliver pellet transport vehicles on KAMAZ, MAZ, and Chinese chassis across Russia and CIS countries: Kazakhstan, Kyrgyzstan, Moldova, Azerbaijan, Armenia, Belarus, Tajikistan, Uzbekistan.
Chassis wheel formula 43253-2010-69(R4) 4x2; tire type 2; chassis load capacity 9.44 tons; engine power 250 hp; engine model Cummins ISB6.7E5 250 (E-5); gearbox ZF6; main gear ratio 6.53; tires 11.00R22.5; fuel tank capacity 350 liters; BOSCH fuel pump, DSK.
Technical specifications of the pellet transport vehicle:
Pellet bin capacity - 13m³
Bin material - carbon steel ST52
The bin is divided into two or three sections by partitions.
Bin shape - cylindrical section with two cones.
Material flow between sections is not allowed.
Pellet handling equipment
Two or three DN450 mm diameter hatches at the top of the tank.
Hatch covers are secured in the closed position with four bolt-locks.
Pellet unloading equipment
Unloading is performed pneumatically.
Two or three unloading cones at the bottom of the tank.
Pneumatic shut-off valve for each section.
Steel unloading pipelines DN100.
The unloading pipeline is directed backwards, equipped with a Storz-type BRS DN100.
Unloading hoses
2 unloading hoses of 4 meters each are stored in plastic cases on the right side.
Equipped with Storz-type BRS DN100.
Tank equipment
Storage compartment in the rear console.
Plastic water tank with soap dispenser.
Work zone lighting.
Side protection.
Ladder at the rear of the tank.
Raising rails with pneumatic drive.
Trap made of perforated profile at the top, along the entire length of the tank.
Bin painting
Interior surfaces are painted.
Exterior painting – 2 layers of primer + 2 layers of finish paint, color white RAL 9003.
Ask a question about automotive equipment:
+7 (4922) 779-699
Yuri Fomin +7 (915) 766-66-46, fomin@kamaz33.ru
