Pellet truck with pneumatic unloading on JAC-350 chassis
The unloading speed of the pellet truck with pneumatic unloading is 785 m³/h or 8 tons/min.
We supply pellet trucks on KAMAZ, MAZ, and Chinese chassis throughout Russia and the CIS countries: Kazakhstan, Kyrgyzstan, Moldova, Azerbaijan, Armenia, Belarus, Tajikistan, Uzbekistan.
Technical specification of the unit:
Cargo transported: Bulk materials
Tank capacity: 24m³
Number of compartments: 3
Tank material: Carbon steel ST52
Tank shape: Cylindrical section with three cones. The tank is divided into three sections by partitions.
Loading equipment: Three manholes with a diameter of 450 mm at the top of the tank. The manhole covers are fixed in the closed position with four wing bolts.
Unloading equipment: Unloading is performed pneumatically. Three unloading cones are located at the bottom of the tank.
Shut-off valve with pneumatic control for each section.
Unloading pipelines DN100 steel.
The unloading pipeline is extended backward and equipped with a Storz type DN100 coupling.
Compressor driven by the PTO of the chassis, oil-free, capacity 785 m³/h.
Unloading hoses: 2 unloading hoses, 4 meters each, stored in plastic casings on the right side.
Equipped with Storz type DN100 couplings.
Tank equipment:
- Compartment for personal items in the rear console
- Plastic water tank with soap dispenser
- Work area lighting
- Side protection made of aluminum alloy
- Ladder at the rear of the tank
- Lifting handrails with pneumatic drive
- Access ladder made of perforated profile on top, along the entire length of the tank
Tank painting:
- Shot blasting of all steel parts
- Epoxy primer treatment PPG
- Two-component glossy enamel painting PPG
Chassis technical specifications
Wheel formula 6 x 4
Cabin
All-metal, two-door, two-seat with 1 sleeping place, tilting forward, cabin suspension: on 4 hydraulic shock absorbers with a hydraulic lock, with an autonomous liquid pre-start cabin heater, seat with pneumatic suspension. The cabin is equipped with external lighting devices, providing excellent illumination of the roadway in low visibility conditions.
Air conditioner Yes
FM/AM radio with USB Yes
Power window drive Yes
Front fog lights Yes
Dimensions, mm:
-length-width-height 8630 2550 3450
Wheelbase, mm: 4100+1350
Track width of front / rear wheels, mm 2040/1870
Body
Size 5500x2270x1630 mm, with a body volume of 20 cubic meters, with rear unloading, with heating of the rear board, automatic locks on the upper mounting, protective visor between the cabin and the dump platform with a rewinding device, installation of a stationary ladder on the left side, with a ramp, with side anti-rollback protection on both sides, with spare wheel mounting on the front panel.
The unladen weight of the vehicle, kg: 15,600
The technically permissible maximum weight of the vehicle, kg: 35,000
Engine
Brand, type: WP10.350E53, WEICHAI
-
Number and arrangement of cylinders: 6, inline
-
Displacement, cm3: 9726
-
Maximum power, kW / hp (min - 1) according to UNECE Regulation No. 85: 252 kW / 343 hp (1900 min - 1)
-
Maximum torque, Nm (min - 1): 1600 Nm (1200~1500 min - 1)
-
Fuel injection system (type, marking): BOSCH, WPCPN2
Transmission
Type: Manual
- Clutch (brand, type): Valeo, dry single disc
- Gearbox (brand, type): FAST, 12JSD180T+QH70, manual control
- Number of gears forward - 12, reverse - 2
- Gear ratios I-15.53, II-12.08, III-9.39, IV-7.33,V-5.73,VI-4.46, VII-3.48, VIII-2.71, IX-2.1, X-1.64, XI-1.28, XII-1, З.X.I-14.86, З.X.II-3.33
- Final drive (type, marking): Hypoid, Anhui Ankai Futian Shuguang Axle Co.,Ltd 2400010Y30B0, 2500010Y30B0 (4.76) 2400010Y30B0C, 2500010Y30B0C (4.2)/ Shandong Pengxiang Automobile Co. Ltd. 2400010Y30B0U, 2500010Y30B0U (4.76) 2400010Y30B0X, 2500010Y30B0X (4.2)
- Gear ratio 4.76 / 4.2
Fuel tank capacity (l): 400
Ask a question about automotive equipment:
+7 (4922) 779-699
Yuri Fomin +7 (915) 766-66-46, fomin@kamaz33.ru
