Pellet truck with pneumatic unloading 13m3
The unloading speed of the pellet truck with pneumatic unloading is 785 m³/h or 8 tons/min.
We supply pellet trucks on KAMAZ, MAZ, and Chinese chassis across Russia and CIS countries: Kazakhstan, Kyrgyzstan, Moldova, Azerbaijan, Armenia, Belarus, Tajikistan, Uzbekistan.
Wheel configuration of chassis 43253-2010-69(R4) 4x2; tire type 2; chassis load capacity 9.44 tons; engine power 250 hp; engine model Cummins ISB6.7E5 250 (E-5); transmission ZF6; main drive ratio 6.53; tires 11.00R22.5; fuel tank capacity 350 liters; fuel injection pump BOSCH, DZK.
Technical specification of the feed truck:
Pellet truck bunker capacity - 13m3
Bunker material - carbon steel ST52
The bunker is divided by partitions into two or three sections.
Bunker shape - cylindrical cross-section, with two cones
Material flow between sections is not allowed.
Equipment for pellet handling
Two or three hatches with a diameter of DN450 mm at the top of the tank
Hatch covers are secured in a closed position with four butterfly bolts.
Pellet truck unloading equipment
Unloading is done pneumatically
Two or three unloading cones at the bottom of the tank
Shut-off valve with pneumatic control for each section
Steel unloading pipelines DN100
Unloading pipeline routed to the rear, equipped with Storz DN100 quick couplings
Unloading hoses
2 unloading hoses, each 4 meters long, stored in plastic compartments on the right side
Equipped with Storz DN100 quick couplings
Tank equipment
Storage compartment in the rear console
Plastic water tank with soap dispenser
Work area lighting
Side protection
Ladder at the rear of the tank
Pneumatically operated safety rails
Perforated walkway on top, along the entire length of the tank
Bunker painting
Internal surfaces are painted
External painting – 2 layers of primer + 2 layers of finish paint, color white RAL 9003
Ask a question about automotive equipment:
+7 (4922) 779-699
Yuri Fomin +7 (915) 766-66-46, fomin@kamaz33.ru
