Feed truck with pneumatic unloading 20m³ on KAMAZ-65115 chassis
Feed trucks with pneumatic unloading move feed by air flow under pressure created by a compressor. A feed truck with pneumatic unloading can also be used as a dry cargo carrier: flour truck, cement truck.
Advantages of feed trucks with pneumatic unloading over auger feed trucks:
- The unloading speed of a feed truck with pneumatic unloading is 312 tons per hour (480 m³ per hour) or 5200 kg/min, which is 20 times higher than the unloading speed of an auger feed truck, which is 15 tons per hour or 250 kg/min.
- A feed truck with pneumatic unloading, unlike auger feed trucks, does not damage the pellets used for complete feed during overloading.
- Feed trucks with pneumatic unloading have better sealing and prevent spillage of feed during operation, which reduces the likelihood of contact with wild birds and the risk of contamination.
- Compared to auger feed trucks, feed trucks with pneumatic unloading have lower feed caking and sticking to the walls of the hopper, and lower chances of moisture entering the hopper.
- Feed trucks with pneumatic unloading are structurally more reliable compared to the auger unloading mechanism (frequent issues with chain breakage, pin and sprocket failures).
We provide the supply of feed trucks on KAMAZ, MAZ, and Chinese chassis across Russia and CIS countries: Kazakhstan, Kyrgyzstan, Moldova, Azerbaijan, Armenia, Belarus, Tajikistan, Uzbekistan.
__________________________
Base chassis KAMAZ-65115
Wheel formula: 6x4
Engine: Cummins ISB6.7, 300 hp, Euro-4
Transmission: ZF 9S1310, mechanical, 9-speed
Cab: Restyled, with one sleeping place
Dimensions, mm: 8120 x 2500 x 3850
Front suspension: Leaf spring
Rear suspension: Leaf spring
Gross weight: 22400 kg
Unladen weight: 11100 kg
Payload: 11300 kg
Load on the front axle: 5750 kg
Load on the rear axle: 16650 kg
Carried product: Bulk goods
Tank capacity: 20 m³
Number of compartments: 3
Tank material: Carbon steel ST52
Tank shape: Cylindrical section with three cones
Tank divided by partitions into three compartments
Loading equipment: Three hatches with a diameter of 450 mm at the top of the tank
Hatch covers are fixed in a closed position with four wing bolts
Unloading equipment: Pneumatic unloading
Three unloading cones in the lower part of the tank
Pneumatically controlled shut-off valve for each section
Unloading pipes: DN100 steel
Unloading pipeline is directed backward, equipped with BRS type Storz DN100
Compressor BDW-9 powered by the chassis’ PTO, oil-free, performance 540 m³/h
Discharge hoses:
2 discharge hoses of 4 m each, stored in plastic bins on the right side
Equipped with BRS type Storz DN100
Tank equipment:
Compartment for items in the rear console
Plastic water tank with soap dispenser
Working zone lighting
Side protection made of aluminum alloy
Ladder at the rear of the tank
Raising handrails with pneumatic drive
Grating from perforated profile at the top, along the entire length of the tank
Tank painting:
Shot blasting of all steel parts
Epoxy primer PPG
Two-component glossy enamel PPG
Ask a question about automotive technology:
+7 (4922) 779-699
Yuri Fomin +7 (915) 766-66-46, fomin@kamaz33.ru
_____________________________________________
ZSK (Dry Feed Loaders) are designed for transporting dry compound feeds from manufacturers to livestock farms and for loading bulk goods into stationary storage. The dry feed loader (ZSK-15, ZSK-20) combines a feeder container (barrel) with a pneumatic unloading unit.
The unloading speed of the feed truck with pneumatic unloading is 312 tons per hour (480 m³ per hour) or 5200 kg/min, which is 20 times faster than the unloading speed of a screw unloading feed truck, which is 15 tons per hour or 250 kg/min.
In addition to its primary purpose, a feed truck with pneumatic unloading (dry feed loader with pneumatic unloading) can also be used for bulk transport of grains, flour, dry construction mixtures, and cement.
All feed trucks (ZSK dry feed loaders) come with a full manufacturer’s warranty and are provided with spare parts, repairs, and servicing. You can purchase a dry feed loader with delivery to any location in Russia.
For an optimal choice of equipment, refer to the catalog of the range of feed trucks with dry feed loading equipment. We will answer all your questions.
You can buy a ZSK-20 feed truck with pneumatic unloading on the KAMAZ-65115 chassis (buy ZSK-20 with pneumatic unloading on the KAMAZ-65115 chassis) on our website by submitting a request for the corresponding model on the chassis of your choice.
