Technical Specifications for the Garbage Collection System with Washing:
Effective body volume: 12 m³
Effective loading hopper volume: 1.7 m³
Container washing system
Operating pressure: 180 bar, Maximum pressure: 200 bar
Garbage compaction ratio: Up to 6:1, depending on the type of waste
Body cross-section: Oval
Body material: ST-52 steel
Loading hopper material: High-strength HARDOX 450 steel
Universal grab tipper for loading all types of domestic and European 0.12 to 1.1 m³ containers
Tandem gear hydraulic pump
Body color: Customizable (according to RAL color chart)
Competitive Advantages:
- Floor of the receiving tank and compaction plates made from HARDOX 450 steel
- Hydraulic cylinders for the falling plate are positioned outside the danger zone and inverted with rods facing upwards to create higher pressure. Sliding elements can be easily replaced, and the position sensor is in a safe zone. The hydraulic cylinder pins are made of high-strength steel
- Push plate allows for complete unloading and prevents waste from entering the space behind the garbage truck cabin
- Push plate guides can be easily replaced
- Universal tipper for loading all types of containers from 0.12 to 1.1 m³, enabling loading from practically any height, which is especially useful for uneven surfaces
- One dirty water tank under the receiving tank
- Second dirty water tank with a capacity of 680 L behind the cabin
- Clean water tank with a capacity of 1,500 L behind the cabin
- Disinfectant solution tank with a capacity of 60 L
- Two high-pressure water pumps and a clean water filter
- Dirty water pump
- Lance for container washing with 100 bar pressure and 10 m hose length
- Disinfection gun for containers
- Water pressure in nozzle: 80-100 bar; pump performance for container washing: 40-50 L/min; pump brand and country: Pratissoli (Italy); washing time per container: 15-30 sec; water consumption: 15-20 L per container
- Completely sealed and durable rear door
- All electrical control panels are protected by metal boxes from mechanical damage
- Tandem gear pump, ensuring high-speed operation and the ability to perform multiple operations simultaneously
- Hydraulic system uses filters in the pressure (1) and return (5) lines, extending the service life of the hydraulic components of the garbage truck
- Handrails and foldable steps for operators
- Two wide drainage caps for draining the liquid fraction from the loading tank
- Pneumatic engagement of the power take-off (PTO), with the ability to unload the garbage truck from the cabin
Chassis Technical Specifications:
Wheel configuration: 4x2; wheelbase: 4,200 mm; tire type: Dual; chassis payload capacity: 13.8 tons; engine power: 300 hp; engine model: ISB6.7E5 300, Euro 5; КПП ZF9; transmission model: ZF9, 9-speed; final drive ratio: 6.33; fuel system: BOSCH, Common Rail; exhaust gas neutralization system: AdBlue; cabin: Restyled, without sleeping berth; tires: 315/80R22.5; fuel tank capacity: 210 L; inter-wheel lock: Yes; PTO with pump. Warranty: garbage truck equipment: 12 months,chassis: 24 months or 100,000 km, whichever comes first. Delivery Time: 60 working days
