Hook Loader (Multilift) HL-7 on JAC-120 Chassis
Chassis Specifications (N120):
Manufacturer: JAC
Waste Transported: 6 tons
Wheelbase: 3800 mm
Engine Model: Cummins ISF3.8s5154, 152 HP
Axles: DongFeng DANA
Brakes: Drum brakes
Multimedia: Bluetooth, air conditioning, parking sensors.
Dimensions (L×W×H): 6990×2116×2300 mm
Max Speed: 110 km/h
Engine Volume: 3760 cm³
Max Load on Front Axle: 3100 kg
Loader Class: T05PLUS
Container Capacity: 4-9 m³
Loader Mounting Length (L): 3805 mm
Loader Working Length (R): 3630 mm
Min. Internal Length of Removable Body: 3750 mm (with hydraulic locks)
Max. Internal Length of Removable Body: 4500 mm (overhang from loader edge – 1051 mm)
Hook Height: 900/920 mm (DIN 30722-3), offset 140 mm
Offset of Hydraulic Locking Mechanism (D): 450 mm
Working Width of Body Supports: 1060 mm
Height of Body Supports (h): 160 mm
Tip Angle: 48°
Loading/Tipping Time: 45 sec / 45 sec @ 40 l/min
Hydraulic System Working Pressure: 240 bar
Recommended Hydraulic Pump Flow Rate: 40 l/min
Pneumatic System Working Pressure: 6 – 8 bar
Control Type: Electric control system
Weight: 850 kg
Structural Components: Supporting frame, telescopic boom, middle frame, rear frame. Rear guide rollers.
Hydraulic Components: 2 double-acting cylinders, Ø120 mm, 1 double-acting cylinder, Ø70 mm, 1 double-acting cylinder, Ø40 mm.
Electrical Components: Buzzer, end sensor for hydraulic position of body locks.
Ask a question about automotive equipment:
+7 (4922) 779-699
Yuri Fomin +7 (915) 766-66-46, fomin@kamaz33.ru
________________________________________________
Hook loaders (multilifts) are mounted on the chassis of KAMAZ, MAZ, and also on Chinese vehicle chassis. They provide versatility in the use of heavy-duty vehicles and eliminate the need for operating organizations to maintain an excess amount of expensive special equipment on truck chassis. Multilift modules are assembled on specially designed subframes for use with corresponding detachable containers for waste collection, installations for washing waste containers, platforms for oversized equipment, and tanks.
The multilift is suitable for the following tasks:
- Construction, when equipment of various types (slow-moving machines, compressors, compactors, concrete mixers) and oversized waste need to be transported.
- Municipal services – for the removal of solid household waste.
- Agricultural – for the storage of grain crops.
- Forestry – for the transportation of logging and sawmill waste.
At the company "AVTOKRAFT," you can purchase multilifts (hook loaders) and spare parts for them. Filling and emptying the removable container can be done separately from the truck itself, which can be transporting another container at the same time. These vehicles can load and unload functional modules from the platform without the need for truck cranes. The body unloading can be done using a tipper method.
