The vacuum truck is designed for vacuum cleaning of cesspools, transportation of sewage to disposal sites, and can also be used for the mechanized filling, transportation, and unloading of any technical liquids with a density of 1.0 g/cm³.
Chassis
Base chassis: KAMAZ 65115
Power: 300
Wheel formula: 6x4
Tank
Tank capacity: 10 m³
Tank shell thickness: 4 mm
Tank material: Low-alloy steel grade 09G2S
Cross-section of the tank: Round
Tank diameter: 1600 mm
Tank filling sound signal: Available
Structural features of the tank
Rigidity of the structure: The tank is equipped with external stringers
Tank attachment to support: With tension straps
Rear bottom of the tank: Can be opened (manual opening of the rear bottom)
Support attachment to the chassis frame: With metal stays and spring compensators. A rubber gasket (damper) is provided between the support and chassis frame.
Two-level overflow protection system:
- Valve in the technological neck in the form of a ball in a basket, which blocks the suction pipe when the tank is full.
- Sensor located in the technical neck for shutting down the chassis engine when the tank is filled.
Vacuum/pressure limit:
- One safety valve for pressure limitation
- One safety valve for vacuum limitation
Water separator: Equipped with a valve for draining condensate
Service of the neck: Ladder with a platform made of perforated sheet
Visual control of tank filling: Spherical viewing window located on the rear bottom of the tank
Suction pipe: DN-100 with slide valve ANM-53 – 1 pc.
Hose storage bins: 2 pcs. Located on the sides of the tank.
Suction and pressure hose: 1 pc. DN-100, 6 m long
Vacuum pump:
Model/type: KO-505
Pump capacity, m³/h: 310
Pump drive: Via a cardan shaft
Cleaning depth of the pit: 4 m
Pump control: 4
Ask a question about automotive equipment:
+7 (4922) 779-699
Yuri Fomin +7 (915) 766-66-46, fomin@kamaz33.ru
